64-19-7
Industrial Grade; Food Grade
C2H4O2; CH3COOH
60.052 g/mol
2915211900
Acetic acid
Acetic acid glacial; Glacial acetic acid; Ethanoic acid; Ethylic acid; Hydrogen acetate; Methanecarboxylic acid
Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
1. Package information
30kg/HDPE drum---800drums/20fcl*---24mts*/20fcl
220kg/HDPE drum---80drums/20fcl---17.6mts/20fcl
1.05mts/IBC drum---20drums/20fcl---21mts/20fcl
*20fcl=20 feet container load
*mts=metric tons
2. Product Summary
Name: Glacial Acetic Acid
Grade: Industrial Grade; Food Grade
Content: 80%, 90%, 99.8%, 99.9%
2.1 Identifiers
IUPAC Name | Acetic acid |
Synonyms | Acetic acid glacial; Glacial acetic acid; Ethanoic acid; Ethylic acid; Hydrogen acetate; Methanecarboxylic acid |
Molecular formula | C2H4O2; CH3COOH |
Molecular weight | 60.05 g/mol |
CAS No. | 64-19-7 |
InChI | InChI=1S/C2H4O2/c1-2(3)4/h1H3,(H,3,4) |
SMILES | CC(O)=O |
ChemSpider | 171 |
ChEMBL | ChEMBL539 |
ECHA InfoCard | 100.000.528 |
EC Number | 200-580-7 |
PubChem CID | 176 |
UNII | Q40Q9N063P |
UN Code | 2789 |
HS Code | 2915211900 |
2.2 Physical and chemical Properties
Physical State | Liquid |
Appearance | Colorless |
Odor | pungent |
Odor Threshold | No information available |
pH | 2.4 at 60.05 g/mol |
Melting Point/Range | 16.2°C - lit. |
Boiling Point/Range | 117°C - 118°C |
Flash Point | No information available |
Evaporation Rate | No information available |
Flammability (solid, gas) | Not applicable |
Upper Flammability or explosive limits | Upper explosion limit: 19.9% (V) |
Lower Flammability or explosive limits | Lower explosion limit: 4% (V) |
Vapor Pressure | 73.3 hPa at 50.0°C 15.2 hPa at 20.0°C |
Vapor Density | No information available |
Relative Density | 1.049 g/cm3 at 25°C |
Solubility | Completely soluble |
Partition coefficient (n-octanol/water) | logPow: -0.17 |
Autoignition Temperature | 485.0°C |
Decomposition Temperature | No information available |
Viscosity | No information available |
2.3 Spectral information
No data available
2.4 Safety and Hazards information
2.4.1 Classification
OSHA/HCS status
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 3
SKIN CORROSION - Category 1A
SERIOUS EYE DAMAGE - Category 1
2.4.2 GHS label elements
Hazard pictograms
Signal word
Danger
Hazard statements
Flammable liquid and vapor.
Causes severe skin burns and eye damage.
2.4.3 Precautionary statements
Prevention
Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Use explosion-proof electrical, ventilating, lighting, and all material-handling equipment. Do not breathe vapor or spray. Wear protective gloves. Wear eye or face protection. Wear protective clothing.
Response
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Storage
Not applicable.
Disposal
Dispose of contents and container in accordance with all local, regional, national, and international regulations.
Supplemental label elements
Not applicable.
Hazards not otherwise classified
Corrosive to respiratory tract
2.5 Stability and reactivity
Reactivity
No data available.
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
Heat, flames, and sparks.
Incompatible materials
Oxidizing agents, Soluble carbonates and phosphates, Hydroxides, Metals, Peroxides, permanganates, for example potassium permanganate, Amines, Alcohols, Nitric acid
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions.-Carbon oxides
Other decomposition products-No data available
2.6.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - 3.310 mg/kg
Remarks: (RTECS)
LC50 Inhalation - Mouse - 4 h - 2.819 mg/l
Remarks: (RTECS)
Skin corrosion/irritation
Skin - Rabbit
Result: Causes burns. - 4 h
(OECD Test Guideline 404)
Remarks: (IUCLID)
Serious eye damage/eye irritation
Eyes - Rabbit
Result: Causes burns. - 4 h
(OECD Test Guideline 405)
Remarks: (IUCLID)
Causes serious eye damage.
Respiratory or skin sensitization
No data available
Germ cell mutagenicity
Ames test
Salmonella typhimurium
Result: negative
Mutagenicity (mammal cell test): chromosome aberration.
Chinese hamster ovary cells
Result: negative
Mutagenicity (micronucleus test)
Rat - male and female - Bone marrow
Result: negative
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible, or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: AF1225000
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomiting, Ingestion or inhalation of concentrated acetic acid causes damage to tissues of the respiratory and digestive tracts. Symptoms include hematemesis, bloody diarrhea, edema and/or perforation of the esophagus and pylorus, pancreatitis, hematuria, anuria, uremia, albuminuria, hemolysis, convulsions, bronchitis, pulmonary edema, pneumonia, cardiovascular collapse, shock, and death. Direct contact or exposure to high concentrations of vapor with skin or eyes can cause erythema, blisters, tissue destruction with slow healing, skin blackening, hyperkeratosis, fissures, corneal erosion, opacification, iritis, conjunctivitis, and possible blindness. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
2.7.1 Toxicity
Toxicity to fish | semi-static test LC50 - Oncorhynchus mykiss (rainbow trout) - > 1.000 mg/l - 96 h (OECD Test Guideline 203) |
Toxicity to daphnia and other aquatic invertebrates | static test EC50 - Daphnia magna (Water flea) - > 1.000 mg/l - 48 h (OECD Test Guideline 202) |
Toxicity to algae | static test EC50 - Skeletonema costatum - > 1.000 mg/l - 72 h (ISO 10253) |
Toxicity to bacteria | EC5 - Pseudomonas putida - 2.850 mg/l - 16 h Remarks: neutral (maximum permissible toxic concentration) (Lit.) microtox test EC50 - Photobacterium phosphoreum - 11 mg/l - 15 min Remarks: (IUCLID) |
2.7.2 Persistence and degradability
Biodegradability | Result: 99 % - Readily biodegradable. (OECD Test Guideline 301D) Remarks: (HSDB) Result: 95 % - Readily eliminated from water (OECD Test Guideline 302B) |
Biochemical Oxygen Demand (BOD) | 880 mg/g Remarks: (Lit.) |
Ratio BOD/ThBOD | 76 % Remarks: (IUCLID) |
2.7.3 Bioaccumulative potential
No data available
2.7.4 Mobility in soil
No data available
2.7.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
2.7.6 Other adverse effects
Additional ecological Information | No data available |
1. Package information
30kg/HDPE drum---800drums/20fcl*---24mts*/20fcl
220kg/HDPE drum---80drums/20fcl---17.6mts/20fcl
1.05mts/IBC drum---20drums/20fcl---21mts/20fcl
*20fcl=20 feet container load
*mts=metric tons
2. Product Summary
Name: Glacial Acetic Acid
Grade: Industrial Grade; Food Grade
Content: 80%, 90%, 99.8%, 99.9%
2.1 Identifiers
IUPAC Name | Acetic acid |
Synonyms | Acetic acid glacial; Glacial acetic acid; Ethanoic acid; Ethylic acid; Hydrogen acetate; Methanecarboxylic acid |
Molecular formula | C2H4O2; CH3COOH |
Molecular weight | 60.05 g/mol |
CAS No. | 64-19-7 |
InChI | InChI=1S/C2H4O2/c1-2(3)4/h1H3,(H,3,4) |
SMILES | CC(O)=O |
ChemSpider | 171 |
ChEMBL | ChEMBL539 |
ECHA InfoCard | 100.000.528 |
EC Number | 200-580-7 |
PubChem CID | 176 |
UNII | Q40Q9N063P |
UN Code | 2789 |
HS Code | 2915211900 |
2.2 Physical and chemical Properties
Physical State | Liquid |
Appearance | Colorless |
Odor | pungent |
Odor Threshold | No information available |
pH | 2.4 at 60.05 g/mol |
Melting Point/Range | 16.2°C - lit. |
Boiling Point/Range | 117°C - 118°C |
Flash Point | No information available |
Evaporation Rate | No information available |
Flammability (solid, gas) | Not applicable |
Upper Flammability or explosive limits | Upper explosion limit: 19.9% (V) |
Lower Flammability or explosive limits | Lower explosion limit: 4% (V) |
Vapor Pressure | 73.3 hPa at 50.0°C 15.2 hPa at 20.0°C |
Vapor Density | No information available |
Relative Density | 1.049 g/cm3 at 25°C |
Solubility | Completely soluble |
Partition coefficient (n-octanol/water) | logPow: -0.17 |
Autoignition Temperature | 485.0°C |
Decomposition Temperature | No information available |
Viscosity | No information available |
2.3 Spectral information
No data available
2.4 Safety and Hazards information
2.4.1 Classification
OSHA/HCS status
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 3
SKIN CORROSION - Category 1A
SERIOUS EYE DAMAGE - Category 1
2.4.2 GHS label elements
Hazard pictograms
Signal word
Danger
Hazard statements
Flammable liquid and vapor.
Causes severe skin burns and eye damage.
2.4.3 Precautionary statements
Prevention
Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Use explosion-proof electrical, ventilating, lighting, and all material-handling equipment. Do not breathe vapor or spray. Wear protective gloves. Wear eye or face protection. Wear protective clothing.
Response
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Storage
Not applicable.
Disposal
Dispose of contents and container in accordance with all local, regional, national, and international regulations.
Supplemental label elements
Not applicable.
Hazards not otherwise classified
Corrosive to respiratory tract
2.5 Stability and reactivity
Reactivity
No data available.
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
Heat, flames, and sparks.
Incompatible materials
Oxidizing agents, Soluble carbonates and phosphates, Hydroxides, Metals, Peroxides, permanganates, for example potassium permanganate, Amines, Alcohols, Nitric acid
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions.-Carbon oxides
Other decomposition products-No data available
2.6.1 Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - 3.310 mg/kg
Remarks: (RTECS)
LC50 Inhalation - Mouse - 4 h - 2.819 mg/l
Remarks: (RTECS)
Skin corrosion/irritation
Skin - Rabbit
Result: Causes burns. - 4 h
(OECD Test Guideline 404)
Remarks: (IUCLID)
Serious eye damage/eye irritation
Eyes - Rabbit
Result: Causes burns. - 4 h
(OECD Test Guideline 405)
Remarks: (IUCLID)
Causes serious eye damage.
Respiratory or skin sensitization
No data available
Germ cell mutagenicity
Ames test
Salmonella typhimurium
Result: negative
Mutagenicity (mammal cell test): chromosome aberration.
Chinese hamster ovary cells
Result: negative
Mutagenicity (micronucleus test)
Rat - male and female - Bone marrow
Result: negative
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible, or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: AF1225000
Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomiting, Ingestion or inhalation of concentrated acetic acid causes damage to tissues of the respiratory and digestive tracts. Symptoms include hematemesis, bloody diarrhea, edema and/or perforation of the esophagus and pylorus, pancreatitis, hematuria, anuria, uremia, albuminuria, hemolysis, convulsions, bronchitis, pulmonary edema, pneumonia, cardiovascular collapse, shock, and death. Direct contact or exposure to high concentrations of vapor with skin or eyes can cause erythema, blisters, tissue destruction with slow healing, skin blackening, hyperkeratosis, fissures, corneal erosion, opacification, iritis, conjunctivitis, and possible blindness. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
2.7.1 Toxicity
Toxicity to fish | semi-static test LC50 - Oncorhynchus mykiss (rainbow trout) - > 1.000 mg/l - 96 h (OECD Test Guideline 203) |
Toxicity to daphnia and other aquatic invertebrates | static test EC50 - Daphnia magna (Water flea) - > 1.000 mg/l - 48 h (OECD Test Guideline 202) |
Toxicity to algae | static test EC50 - Skeletonema costatum - > 1.000 mg/l - 72 h (ISO 10253) |
Toxicity to bacteria | EC5 - Pseudomonas putida - 2.850 mg/l - 16 h Remarks: neutral (maximum permissible toxic concentration) (Lit.) microtox test EC50 - Photobacterium phosphoreum - 11 mg/l - 15 min Remarks: (IUCLID) |
2.7.2 Persistence and degradability
Biodegradability | Result: 99 % - Readily biodegradable. (OECD Test Guideline 301D) Remarks: (HSDB) Result: 95 % - Readily eliminated from water (OECD Test Guideline 302B) |
Biochemical Oxygen Demand (BOD) | 880 mg/g Remarks: (Lit.) |
Ratio BOD/ThBOD | 76 % Remarks: (IUCLID) |
2.7.3 Bioaccumulative potential
No data available
2.7.4 Mobility in soil
No data available
2.7.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
2.7.6 Other adverse effects
Additional ecological Information | No data available |
Useage
Acetic acid also called ethanoic acid, is the most important of the carboxylic acids. Anhydrous glacial acetic acid has a variety of uses in different industrial areas, one of the most common usage is in the form of household vinegar, which generally containing 5% of acetic acid and 95% of water. Generally, 99% glacial acetic acid has two major area of application, Industrial and food. When acetic acid is at 99.5 percent concentration, it is referred to as glacial acetic acid. Anhydrous glacial acetic acid for textile has a variety of uses, including as a raw material and solvent in the production of other chemical products.
Industrial applications for glacial acetic acid include:
Vinyl Acetate, cellulose fibers, and plastics: 99% anhydrous glacial acetic acid is used to make many chemicals, including vinyl acetate, acetic anhydride, and acetate esters. Vinyl acetate is used to make polyvinyl acetate, a polymer used in paints, adhesives, plastics, and textile finishes.
Acetic anhydride is used in the manufacture of cellulose acetate fibers and plastics used for photographic film, clothing, and coatings.
Powder glacial acetic acid is also used in the chemical reaction to produce purified terephthalic acid (PTA), which is used to manufacture the PET plastic resin used in synthetic fibers, food containers, beverage bottles and plastic films.
Solvents: 99% anhydrous glacial acetic acid for textile is a hydrophilic solvent, like ethanol. It dissolves compounds such as oils, sulfur and iodine and mixes with water, chloroform, and hexane.
Acidizing oil and gas: glacial acetic acid for textile can help reduce metal corrosion and scale build-up in oil and gas well applications. It is also used in oil well stimulation to improve flow and increase production of oil and gas.
Pharmaceuticals and vitamins: The pharmaceutical industry uses acetic acid in the manufacture of vitamins, antibiotics, hormones, and other products.
Other uses: Salts of acetic acid and various rubber and photographic chemicals are made from acetic acid. 99% glacial acetic acid for textile and its sodium salt are commonly used as a food preservative.
Non aqueous glacial acetic acid for flavoring agents in food industrial:
Glacial acetic acid for flavoring agents can use to preparation vinegar, which is a common food ingredient, often used as a brine in pickling liquids, vinaigrettes, marinades, and other salad dressings. Organic glacial acetic acid for flavoring agents also can be used in food preparation to help control Salmonella contamination in meat and poultry products.
Cleaning: organic non aqueous glacial acetic acid can be used throughout the home as a window cleaner, to clean automatic coffee makers and dishes, as a rinsing agent for dishwashers, and to clean bathroom tile and grout. Organic non aqueous glacial acetic acid for flavoring agents can also be used to clean food-related tools and equipment because it generally does not leave behind a harmful residue and requires less rinsing.
Gardening: In concentrations of 10 to 20 percent, acetic acid can be used as a weed killer on gardens and lawns. When used as an herbicide, the acetic acid can kill weeds that have emerged from the soil, but does not affect the roots of the weed, so they can regrow.
Product Specification
Please click Contact Us or Email directly to info@hiseachem.com to get the latest specification.
Useage
Acetic acid also called ethanoic acid, is the most important of the carboxylic acids. Anhydrous glacial acetic acid has a variety of uses in different industrial areas, one of the most common usage is in the form of household vinegar, which generally containing 5% of acetic acid and 95% of water. Generally, 99% glacial acetic acid has two major area of application, Industrial and food. When acetic acid is at 99.5 percent concentration, it is referred to as glacial acetic acid. Anhydrous glacial acetic acid for textile has a variety of uses, including as a raw material and solvent in the production of other chemical products.
Industrial applications for glacial acetic acid include:
Vinyl Acetate, cellulose fibers, and plastics: 99% anhydrous glacial acetic acid is used to make many chemicals, including vinyl acetate, acetic anhydride, and acetate esters. Vinyl acetate is used to make polyvinyl acetate, a polymer used in paints, adhesives, plastics, and textile finishes.
Acetic anhydride is used in the manufacture of cellulose acetate fibers and plastics used for photographic film, clothing, and coatings.
Powder glacial acetic acid is also used in the chemical reaction to produce purified terephthalic acid (PTA), which is used to manufacture the PET plastic resin used in synthetic fibers, food containers, beverage bottles and plastic films.
Solvents: 99% anhydrous glacial acetic acid for textile is a hydrophilic solvent, like ethanol. It dissolves compounds such as oils, sulfur and iodine and mixes with water, chloroform, and hexane.
Acidizing oil and gas: glacial acetic acid for textile can help reduce metal corrosion and scale build-up in oil and gas well applications. It is also used in oil well stimulation to improve flow and increase production of oil and gas.
Pharmaceuticals and vitamins: The pharmaceutical industry uses acetic acid in the manufacture of vitamins, antibiotics, hormones, and other products.
Other uses: Salts of acetic acid and various rubber and photographic chemicals are made from acetic acid. 99% glacial acetic acid for textile and its sodium salt are commonly used as a food preservative.
Non aqueous glacial acetic acid for flavoring agents in food industrial:
Glacial acetic acid for flavoring agents can use to preparation vinegar, which is a common food ingredient, often used as a brine in pickling liquids, vinaigrettes, marinades, and other salad dressings. Organic glacial acetic acid for flavoring agents also can be used in food preparation to help control Salmonella contamination in meat and poultry products.
Cleaning: organic non aqueous glacial acetic acid can be used throughout the home as a window cleaner, to clean automatic coffee makers and dishes, as a rinsing agent for dishwashers, and to clean bathroom tile and grout. Organic non aqueous glacial acetic acid for flavoring agents can also be used to clean food-related tools and equipment because it generally does not leave behind a harmful residue and requires less rinsing.
Gardening: In concentrations of 10 to 20 percent, acetic acid can be used as a weed killer on gardens and lawns. When used as an herbicide, the acetic acid can kill weeds that have emerged from the soil, but does not affect the roots of the weed, so they can regrow.
Product Specification
Please click Contact Us or Email directly to info@hiseachem.com to get the latest specification.
Quality Control
Qingdao Hisea Chem is a company that focus on delivery reliable and high-quality products. Our analytical laboratory equipped with advanced apparatus as well as a professional chemist team that ensure our product meet your criteria. After you confirmed your order, we make sure your goods will be delivered with the corresponding certificate of analysis (CoA). For more details of our product CoA, Check Products or talk to one of our sale representative.
Quotation & Payment
Qingdao Hisea Chem offer competitive price to our customer. We offer Free on Board (FOB), Cost, Insurance, and Freight (CIF) price to your designated port. Payment options is flexible with Hisea chem, our company have gained great confidence with difference banks all around the world. Email us if you have questions about our quotation and payment policy.
Shipment & After sale service
After over 20 years on global trade, Qingdao Hisea Chem has formed a mature international trade logistics chain. For most of our products, we offer “door to door service”, our professional team gives you this “one-stop” service to save your time and increase your purchase experience.
A: More than 10 years experienced of production chemical production. We have the most professional techniques and team. Great production capacity Sustainable Supply. According to customer requirements, we support the customized.
Q: What's the payment?
A: T/T would be better with quick transfer and few bank. LC could also be accept, but the proceure is complex and the fee is high. You can also use Western Union. For large quantity, sea shipping can be provided.
Q: Are you a factory or trading company?
A: We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and cooperate with us.
Q: How can i get some samples?
A: We are honored to offer you samples. New clients are expected to pay for the courier cost,the samples are free for you.
Q: When can i get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price, Please tell us in your email so that we will regard your inquiry priority.
Q: Where is your factory located?
A: Our factory is located in Qingdao,China.
Q: What is your sample policy?
A: Some of our samples are available for free,while others are available at a cost.
Quality Control
Qingdao Hisea Chem is a company that focus on delivery reliable and high-quality products. Our analytical laboratory equipped with advanced apparatus as well as a professional chemist team that ensure our product meet your criteria. After you confirmed your order, we make sure your goods will be delivered with the corresponding certificate of analysis (CoA). For more details of our product CoA, Check Products or talk to one of our sale representative.
Quotation & Payment
Qingdao Hisea Chem offer competitive price to our customer. We offer Free on Board (FOB), Cost, Insurance, and Freight (CIF) price to your designated port. Payment options is flexible with Hisea chem, our company have gained great confidence with difference banks all around the world. Email us if you have questions about our quotation and payment policy.
Shipment & After sale service
After over 20 years on global trade, Qingdao Hisea Chem has formed a mature international trade logistics chain. For most of our products, we offer “door to door service”, our professional team gives you this “one-stop” service to save your time and increase your purchase experience.
A: More than 10 years experienced of production chemical production. We have the most professional techniques and team. Great production capacity Sustainable Supply. According to customer requirements, we support the customized.
Q: What's the payment?
A: T/T would be better with quick transfer and few bank. LC could also be accept, but the proceure is complex and the fee is high. You can also use Western Union. For large quantity, sea shipping can be provided.
Q: Are you a factory or trading company?
A: We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and cooperate with us.
Q: How can i get some samples?
A: We are honored to offer you samples. New clients are expected to pay for the courier cost,the samples are free for you.
Q: When can i get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price, Please tell us in your email so that we will regard your inquiry priority.
Q: Where is your factory located?
A: Our factory is located in Qingdao,China.
Q: What is your sample policy?
A: Some of our samples are available for free,while others are available at a cost.
0086-532-85708217
0086-532-85708218