7664-93-9
Industrial
H2SO4
98.079 g/mol
2807000010
Sulfuric acid
Hydrogen sulfate; Sulphuric acid; Oil of vitriol; dihydrogen sulfate
Availability: | |||||||||
---|---|---|---|---|---|---|---|---|---|
35kg/drum = 720drums/20fcl = 25.2mts/20fcl
1.4mts/IBC drum = 18drums/20fcl = 25.2mts/20fcl
*20fcl=20 feet container load
*mts=metric tons
Name: Sulfuric Acid/Sulphuric Acid
Grade: Industrial Grade
Content: 99%
IUPAC Name | Sulfuric Acid/Sulphuric Acid |
Synonyms | Hydrogen sulfate; Oil of vitriol; dihydrogen sulfate |
Molecular formula | H2SO4 |
Molecular weight | 98.079g/mol |
CAS No. | 7664-93-9 |
InChI | InChI=1S/H2O4S/c1-5(2,3)4/h(H2,1,2,3,4) |
SMILES | OS(=O)(=O)O |
ChemSpider | 1086 |
ChEMBL | ChEMBL572964 |
ECHA InfoCard | 100.028.763 |
EC Number | 231-639-5 |
PubChem CID | 1118 |
UNII | O40UQP6WCF |
UN Code | 1830 |
HS Code | 2807000010 |
Physical State | Liquid |
Appearance | Colorless |
Odor | Odorless |
Odor Threshold | No information available |
pH | 1 1N aq.sol |
Melting Point/Range | 10°C/50°F |
Boiling Point/Range | 290°C/554°F |
Flash Point | No information available |
Evaporation Rate | No information available |
Flammability (solid, gas) | Not applicable |
Upper Flammability or explosive limits | No information available |
Lower Flammability or explosive limits | No information available |
Vapor Pressure | 1mmHg at 146°C |
Vapor Density | No information available |
Relative Density | 1.840 |
Solubility | No information available |
Partition coefficient (n-octanol/water) | No information available |
Autoignition Temperature | No information available |
Decomposition Temperature | 340°C |
Viscosity | 21mPa.s @ 25°C |
No data available
Classification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Skin corrosion/irritation | Category 1 |
Serious eye damage/Eye Irritation | Category 1 |
Specific target organ toxicity (single exposure) | Category 3 |
Target organs | Respiratory system |
Label Elements
Signal Word
Danger
Hazard Statements
Causes severe skin burns and eye damage
May cause respiratory irritation
Precautionary Statements
Prevention
Do not breathe dust/fume/gas/mist/vapors/spray; Wash face, hands and any exposed skin thoroughly after handling; Wear protective gloves/protective clothing/eye protection/face protection; Use only outdoors or in a well-ventilated area
Response
Immediately call a POISON CENTER or doctor/physician
Inhalation
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
Skin
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower Wash contaminated clothing before reuse
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
Ingestion
IF SWALLOWED: Rinse mouth. DO NOT induce vomiting
Storage
Store locked up
Store in a well-ventilated place. Keep container tightly closed
Disposal
Dispose of contents/container to an approved waste disposal plant
Hazards not otherwise classified (HNOC)
None identified
Reactive Hazard
Yes
Stability
Water reactive. Hygroscopic.
Conditions to Avoid
Incompatible products. Excess heat. Exposure to moist air or water.
Incompatible Materials
Strong oxidizing agents, Combustible material, Bases, Organic materials, Reducing agents, Powdered metals, Peroxides
Hazardous Decomposition Products
Hydrogen, Sulfur oxides
Hazardous Polymerization
Hazardous polymerization does not occur.
Hazardous Reactions
Contact with metals may evolve flammable hydrogen gas. Reacts violently with water.
Acute Toxicity
Product Information
Component Information
Component | LD50 Oral | LD50 Dermal | LC50 Inhalation |
Sulfuric acid | 2140 mg/kg (Rat) | Not listed | 510 mg/m3 (Rat) 2h |
Toxicologically Synergistic
No information available
Products
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Irritation
Causes severe burns by all exposure routes
Sensitization
No information available
Carcinogenicity
The table below indicates whether each agency has listed any ingredient as a carcinogen.
Component | CAS No. | IARC | NTP | ACGIH | OSHA | Mexico |
Sulfuric acid | 7664-93-9 | Group 1 | Not listed | A2 | X | A2 |
IARC: (International Agency for Research on Cancer)
Group 1 - Carcinogenic to Humans
Group 2A - Probably Carcinogenic to Humans
Group 2B - Possibly Carcinogenic to Humans
ACGIH: (American Conference of Governmental Industrial hygienists)
A1 - Known Human Carcinogen
A2 - Suspected Human Carcinogen
A3 - Animal Carcinogen
ACGIH: (American Conference of Governmental Industrial Hygienists)
Mutagenic Effects | No information available |
Reproductive Effects | No information available. |
Developmental Effects | No information available. |
Teratogenicity | No information available. |
STOT-single exposure | Respiratory system |
STOT-repeated exposure | None known |
Aspiration hazard | No information available |
Symptoms/effects, both acute and delayed | Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation |
Endocrine Disruptor Information | No information available |
Other Adverse Effects | See actual entry in RTECS for complete information. |
Ecotoxicity
Do not empty into drains.
Component | Freshwater Algae | Freshwater Fish | Microtox | Water Flea |
Sulfuric acid | - | 500mg/L LC50 96 h | - | EC50: 29mg/L/24h |
Persistence and Degradability
Miscible with water Persistence is unlikely based on information available.
Bioaccumulation/Accumulation
No information available.
Mobility
Will likely be mobile in the environment due to its water solubility
35kg/drum = 720drums/20fcl = 25.2mts/20fcl
1.4mts/IBC drum = 18drums/20fcl = 25.2mts/20fcl
*20fcl=20 feet container load
*mts=metric tons
Name: Sulfuric Acid/Sulphuric Acid
Grade: Industrial Grade
Content: 99%
IUPAC Name | Sulfuric Acid/Sulphuric Acid |
Synonyms | Hydrogen sulfate; Oil of vitriol; dihydrogen sulfate |
Molecular formula | H2SO4 |
Molecular weight | 98.079g/mol |
CAS No. | 7664-93-9 |
InChI | InChI=1S/H2O4S/c1-5(2,3)4/h(H2,1,2,3,4) |
SMILES | OS(=O)(=O)O |
ChemSpider | 1086 |
ChEMBL | ChEMBL572964 |
ECHA InfoCard | 100.028.763 |
EC Number | 231-639-5 |
PubChem CID | 1118 |
UNII | O40UQP6WCF |
UN Code | 1830 |
HS Code | 2807000010 |
Physical State | Liquid |
Appearance | Colorless |
Odor | Odorless |
Odor Threshold | No information available |
pH | 1 1N aq.sol |
Melting Point/Range | 10°C/50°F |
Boiling Point/Range | 290°C/554°F |
Flash Point | No information available |
Evaporation Rate | No information available |
Flammability (solid, gas) | Not applicable |
Upper Flammability or explosive limits | No information available |
Lower Flammability or explosive limits | No information available |
Vapor Pressure | 1mmHg at 146°C |
Vapor Density | No information available |
Relative Density | 1.840 |
Solubility | No information available |
Partition coefficient (n-octanol/water) | No information available |
Autoignition Temperature | No information available |
Decomposition Temperature | 340°C |
Viscosity | 21mPa.s @ 25°C |
No data available
Classification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Skin corrosion/irritation | Category 1 |
Serious eye damage/Eye Irritation | Category 1 |
Specific target organ toxicity (single exposure) | Category 3 |
Target organs | Respiratory system |
Label Elements
Signal Word
Danger
Hazard Statements
Causes severe skin burns and eye damage
May cause respiratory irritation
Precautionary Statements
Prevention
Do not breathe dust/fume/gas/mist/vapors/spray; Wash face, hands and any exposed skin thoroughly after handling; Wear protective gloves/protective clothing/eye protection/face protection; Use only outdoors or in a well-ventilated area
Response
Immediately call a POISON CENTER or doctor/physician
Inhalation
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
Skin
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower Wash contaminated clothing before reuse
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
Ingestion
IF SWALLOWED: Rinse mouth. DO NOT induce vomiting
Storage
Store locked up
Store in a well-ventilated place. Keep container tightly closed
Disposal
Dispose of contents/container to an approved waste disposal plant
Hazards not otherwise classified (HNOC)
None identified
Reactive Hazard
Yes
Stability
Water reactive. Hygroscopic.
Conditions to Avoid
Incompatible products. Excess heat. Exposure to moist air or water.
Incompatible Materials
Strong oxidizing agents, Combustible material, Bases, Organic materials, Reducing agents, Powdered metals, Peroxides
Hazardous Decomposition Products
Hydrogen, Sulfur oxides
Hazardous Polymerization
Hazardous polymerization does not occur.
Hazardous Reactions
Contact with metals may evolve flammable hydrogen gas. Reacts violently with water.
Acute Toxicity
Product Information
Component Information
Component | LD50 Oral | LD50 Dermal | LC50 Inhalation |
Sulfuric acid | 2140 mg/kg (Rat) | Not listed | 510 mg/m3 (Rat) 2h |
Toxicologically Synergistic
No information available
Products
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Irritation
Causes severe burns by all exposure routes
Sensitization
No information available
Carcinogenicity
The table below indicates whether each agency has listed any ingredient as a carcinogen.
Component | CAS No. | IARC | NTP | ACGIH | OSHA | Mexico |
Sulfuric acid | 7664-93-9 | Group 1 | Not listed | A2 | X | A2 |
IARC: (International Agency for Research on Cancer)
Group 1 - Carcinogenic to Humans
Group 2A - Probably Carcinogenic to Humans
Group 2B - Possibly Carcinogenic to Humans
ACGIH: (American Conference of Governmental Industrial hygienists)
A1 - Known Human Carcinogen
A2 - Suspected Human Carcinogen
A3 - Animal Carcinogen
ACGIH: (American Conference of Governmental Industrial Hygienists)
Mutagenic Effects | No information available |
Reproductive Effects | No information available. |
Developmental Effects | No information available. |
Teratogenicity | No information available. |
STOT-single exposure | Respiratory system |
STOT-repeated exposure | None known |
Aspiration hazard | No information available |
Symptoms/effects, both acute and delayed | Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated: Ingestion causes severe swelling, severe damage to the delicate tissue and danger of perforation |
Endocrine Disruptor Information | No information available |
Other Adverse Effects | See actual entry in RTECS for complete information. |
Ecotoxicity
Do not empty into drains.
Component | Freshwater Algae | Freshwater Fish | Microtox | Water Flea |
Sulfuric acid | - | 500mg/L LC50 96 h | - | EC50: 29mg/L/24h |
Persistence and Degradability
Miscible with water Persistence is unlikely based on information available.
Bioaccumulation/Accumulation
No information available.
Mobility
Will likely be mobile in the environment due to its water solubility
Granules organic raw materials sulfuric acid is the most commonly used chemical, that's why sulfuric acid can refer as universal chemical or king of chemicals. Organic sulfuric acid used as raw material or processing agent in a wide range of applications. Over one million tons of sulfuric acid is made each year in the UK alone, with an additional 40 million tones being produced in the USA. Annual worldwide production of sulfuric acid is around 180 million tons. Raw materials organic sulfuric acid is available in many weight percent, ranging from electrolyte grade (33%) for batteries, to 93%, 98%, and 20-22% fuming oleum containing excess dissolved sulfur trioxide. The grade most often shipped is 93%.
Chemical manufacturing
As a highly important chemical compound, raw materials sulfuric acid is used in the manufacturing process of several well-known chemicals including hydrochloric acid, nitric acid, phosphoric acid, and many other industrial chemicals.
Oil refining
The process of refining crude oil requires the use of an acid as a catalyst and granules sulfuric acid is often used for this purpose. It is used in an SAAU or organic granules sulfuric acid Alkylation Unit.
Metal processing
"Pickling" is a term used to describe the treatment of metals to remove impurities, rust, or scale from the surface, such as in steel making. Today, the use of raw materials granules sulfuric acid for this purpose has decreased a little as the industry now favors the use of hydrochloric acid. Although hydrochloric acid is more expensive than raw materials organic hydrated sulfuric acid, it produces results more quickly and minimizes the loss of base metal during the pickling process.
The manufacturing of rayon
The textile Rayon is made from cellulose fibers derived from wood. These are dissolved in a solution of Tetra Amine Copper (II) to produce a thick blue liquid which is then injected into raw materials industrial grade liquid sulfuric acid to form Rayon fibers. Rayon is a good semi-synthetic textile and can rival silk for drape and luster. Indeed, it is sometimes referred to as "art silk". It is easily dyed, and the fabric is soft, cool, and smooth. However, unlike silk, Rayon does not insulate body heat so is perfect for use in humid and hot countries.
The manufacturing of lead-acid type batteries
Sealed-unit lead-acid type batteries are used in the automotive industry for cars and trucks. Sealed-unit lead-acid type batteries were invented in 1859 by Frenchman Gaston Plants. sulfuric acid is used in a dilute form to act as an electrolyte to allow the flow of electrons between the plates in the battery. Raw materials organic granules sulfuric acid used in this way is commonly called Battery Acid. It can vary in strength according to the battery manufacturer but is generally between 28 to 32 percent or between 4.2 to 5 Molar.
Potato harvesting
Potato farmers employ specialist contractors to spray their fields of potatoes before harvesting so that the green tops die back and blacken within a day or two. This helps to dry out the stem and prevents them from becoming tangled in the harvesting equipment. The usual method of spraying potato tops is with a solution of raw materials industrial grade sulfuric acid.
The manufacturing of medicines
Chemotherapy drugs are used to treat various types of cancer. Cancer cells are more sensitive to DNA damage than normal cells so in chemotherapy treatment cancer cells are destroyed by damaging their DNA. This process is known as alkylation of DNA and a type of drug known as alkylating antineoplastic agents are used. Sulfuric acid is used in the manufacturing process of such drugs
Please click Contact Us or Email directly to info@hiseachem.com to get the latest specification.
Granules organic raw materials sulfuric acid is the most commonly used chemical, that's why sulfuric acid can refer as universal chemical or king of chemicals. Organic sulfuric acid used as raw material or processing agent in a wide range of applications. Over one million tons of sulfuric acid is made each year in the UK alone, with an additional 40 million tones being produced in the USA. Annual worldwide production of sulfuric acid is around 180 million tons. Raw materials organic sulfuric acid is available in many weight percent, ranging from electrolyte grade (33%) for batteries, to 93%, 98%, and 20-22% fuming oleum containing excess dissolved sulfur trioxide. The grade most often shipped is 93%.
Chemical manufacturing
As a highly important chemical compound, raw materials sulfuric acid is used in the manufacturing process of several well-known chemicals including hydrochloric acid, nitric acid, phosphoric acid, and many other industrial chemicals.
Oil refining
The process of refining crude oil requires the use of an acid as a catalyst and granules sulfuric acid is often used for this purpose. It is used in an SAAU or organic granules sulfuric acid Alkylation Unit.
Metal processing
"Pickling" is a term used to describe the treatment of metals to remove impurities, rust, or scale from the surface, such as in steel making. Today, the use of raw materials granules sulfuric acid for this purpose has decreased a little as the industry now favors the use of hydrochloric acid. Although hydrochloric acid is more expensive than raw materials organic hydrated sulfuric acid, it produces results more quickly and minimizes the loss of base metal during the pickling process.
The manufacturing of rayon
The textile Rayon is made from cellulose fibers derived from wood. These are dissolved in a solution of Tetra Amine Copper (II) to produce a thick blue liquid which is then injected into raw materials industrial grade liquid sulfuric acid to form Rayon fibers. Rayon is a good semi-synthetic textile and can rival silk for drape and luster. Indeed, it is sometimes referred to as "art silk". It is easily dyed, and the fabric is soft, cool, and smooth. However, unlike silk, Rayon does not insulate body heat so is perfect for use in humid and hot countries.
The manufacturing of lead-acid type batteries
Sealed-unit lead-acid type batteries are used in the automotive industry for cars and trucks. Sealed-unit lead-acid type batteries were invented in 1859 by Frenchman Gaston Plants. sulfuric acid is used in a dilute form to act as an electrolyte to allow the flow of electrons between the plates in the battery. Raw materials organic granules sulfuric acid used in this way is commonly called Battery Acid. It can vary in strength according to the battery manufacturer but is generally between 28 to 32 percent or between 4.2 to 5 Molar.
Potato harvesting
Potato farmers employ specialist contractors to spray their fields of potatoes before harvesting so that the green tops die back and blacken within a day or two. This helps to dry out the stem and prevents them from becoming tangled in the harvesting equipment. The usual method of spraying potato tops is with a solution of raw materials industrial grade sulfuric acid.
The manufacturing of medicines
Chemotherapy drugs are used to treat various types of cancer. Cancer cells are more sensitive to DNA damage than normal cells so in chemotherapy treatment cancer cells are destroyed by damaging their DNA. This process is known as alkylation of DNA and a type of drug known as alkylating antineoplastic agents are used. Sulfuric acid is used in the manufacturing process of such drugs
Please click Contact Us or Email directly to info@hiseachem.com to get the latest specification.
Quality Control
Qingdao Hisea Chem is a company that focus on delivery reliable and high-quality products. Our analytical laboratory equipped with advanced apparatus as well as a professional chemist team that ensure our product meet your criteria. After you confirmed your order, we make sure your goods will be delivered with the corresponding certificate of analysis (CoA). For more details of our product CoA, Check Products or talk to one of our sale representative.
Quotation & Payment
Qingdao Hisea Chem offer competitive price to our customer. We offer Free on Board (FOB), Cost, Insurance, and Freight (CIF) price to your designated port. Payment options is flexible with Hisea chem, our company have gained great confidence with difference banks all around the world. Email us if you have questions about our quotation and payment policy.
Shipment & After sale service
After over 20 years on global trade, Qingdao Hisea Chem has formed a mature international trade logistics chain. For most of our products, we offer “door to door service”, our professional team gives you this “one-stop” service to save your time and increase your purchase experience.
A: More than 10 years experienced of production chemical production. We have the most professional techniques and team. Great production capacity Sustainable Supply. According to customer requirements, we support the customized.
Q: What's the payment?
A: T/T would be better with quick transfer and few bank. LC could also be accept, but the proceure is complex and the fee is high. You can also use Western Union. For large quantity, sea shipping can be provided.
Q: Are you a factory or trading company?
A: We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and cooperate with us.
Q: How can i get some samples?
A: We are honored to offer you samples. New clients are expected to pay for the courier cost,the samples are free for you.
Q: When can i get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price, Please tell us in your email so that we will regard your inquiry priority.
Q: Where is your factory located?
A: Our factory is located in Qingdao,China.
Q: What is your sample policy?
A: Some of our samples are available for free,while others are available at a cost.
Quality Control
Qingdao Hisea Chem is a company that focus on delivery reliable and high-quality products. Our analytical laboratory equipped with advanced apparatus as well as a professional chemist team that ensure our product meet your criteria. After you confirmed your order, we make sure your goods will be delivered with the corresponding certificate of analysis (CoA). For more details of our product CoA, Check Products or talk to one of our sale representative.
Quotation & Payment
Qingdao Hisea Chem offer competitive price to our customer. We offer Free on Board (FOB), Cost, Insurance, and Freight (CIF) price to your designated port. Payment options is flexible with Hisea chem, our company have gained great confidence with difference banks all around the world. Email us if you have questions about our quotation and payment policy.
Shipment & After sale service
After over 20 years on global trade, Qingdao Hisea Chem has formed a mature international trade logistics chain. For most of our products, we offer “door to door service”, our professional team gives you this “one-stop” service to save your time and increase your purchase experience.
A: More than 10 years experienced of production chemical production. We have the most professional techniques and team. Great production capacity Sustainable Supply. According to customer requirements, we support the customized.
Q: What's the payment?
A: T/T would be better with quick transfer and few bank. LC could also be accept, but the proceure is complex and the fee is high. You can also use Western Union. For large quantity, sea shipping can be provided.
Q: Are you a factory or trading company?
A: We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and cooperate with us.
Q: How can i get some samples?
A: We are honored to offer you samples. New clients are expected to pay for the courier cost,the samples are free for you.
Q: When can i get the price?
A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price, Please tell us in your email so that we will regard your inquiry priority.
Q: Where is your factory located?
A: Our factory is located in Qingdao,China.
Q: What is your sample policy?
A: Some of our samples are available for free,while others are available at a cost.
0086-532-85708917
0086-532-85708218