Our new website is under construction, Sorry for the inconvenience, for more information, please Email info@hiseachem.com
ny-product
Home » Chemicals » Plasticizer » Solvent Composite Synthesis Dimethyl Phthalate

Products Search

Product Category

Share to:

Solvent Composite Synthesis Dimethyl Phthalate

  • 131-11-3
  • Industrial grade
  • C10H10O4
  • 194.19
  • 2917349000
  • Dimethyl Phthalate
  • dimethyl benzene-1,2-dicarboxylate; Dimethyl phthalate; Dimethyl phthalate (DMP); Dimethyl phthalate soution; Phthalic Acid Dimethyl Ester;
Availability:

1. Introduction of Dimethyl Phthalate

Dimethyl phthalate (Dimethyl phthalate), is a kind of organic matter, molecular formula is C10H10O4, molecular weight is 194.19, colorless transparent yellow oily liquid, slightly aromatic taste, can be miscible with ethanol, ether and other general organic solvents, insoluble in water and petroleum ether.

Used as gas chromatographic fixing solution; This product is a kind of plasticizer with strong dissolving power in many kinds of resin, and can be dissolved in many kinds of cellulose resin, rubber, vinyl resin, and has good film forming, adhesion and waterproof property. It is often used with diethyl phthalate in the production of cellulose acetate film, varnish, transparent paper and molding powder. A small amount is used in the production of nitrocellulose. It can also be used as a plasticizer for nitrile rubber. The product can also be used as mosquito repellent oil (crude oil), polyvinyl fluoride coating, methyl ethyl ketone peroxide and DDT solvent.


Chemical Name

Dimethyl Phthalate

CAS No.

131-11-3

Molecular Formula

C10H10O4

Molecular Weight

194.19


2. Properties of Dimethyl Phthalate

Appearance & Physical State

Transparent oily liquid

Boiling Point

282.68 

Flash Point

146.11 ℃

Vapour pressure

no data available

Melting point

5.5℃

Decomposition temperature

no data available

Solubility

Insoluble in water, soluble in common solvents

Density

1.175g/cm³


Security term

S53Avoid exposure - obtain special instructions before use.

S45In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)

S61Avoid release to the environment. Refer to special instructions / safety data sheets.

S36/37 Wear suitable protective clothing and gloves.

S16 Keep away from sources of ignition.


Risk term

R61May cause harm to the unborn child.

R50Very toxic to aquatic organisms.

R62Risk of impaired fertility.

R11 Highly flammable.

R23/24/25 Toxic by inhalation, in contact with skin and if swallowed.


Emergency response editor broadcast

Leaking disposal

Cut off the fire. Emergency personnel wear self-contained breathing apparatus and overalls. Stop leakage as long as safety is ensured. It is mixed with sand or other non-combustible adsorbent and then collected and transported to the waste disposal site or, where safety is ensured, incinerated on site. If a large number of leakage, the use of embankment reception, and then collect, transfer, recycling or harmless treatment after the waste.

Protective measures

Provide good natural ventilation conditions. In general, no protection is required, but in special cases, wear a gas mask. If necessary, wear safety glasses and overalls. Hands generally do not need special protection. Wear an industrial Type A gas mask when there is A high concentration of the product in the air, and use A filter when fog is present. Use filter type A gas mask. When synthesizing and applying the product, especially when heating the product or plastics containing the product, seal to prevent steam and mist from escaping. No smoking at work site, keep good hygiene habits.

First aid measures

Skin contact, take off contaminated clothing, rinse with running water.

Eye contact, immediately open upper and lower eyelids, rinse with running water. Inhaler is removed from site to fresh air. Give oxygen when breathing is difficult. When breathing stops, give artificial respiration immediately. Take it by mistake to drink enough warm water, urge Boston, medical treatment.

Waste disposal: incineration is recommended.

Fire extinguishing method: spray water, foam, carbon dioxide, dry powder, sand.


Storage conditions editor broadcast

Dimethyl phthalate is sensitive to light and not easy to see light for a long time. This product should be stored in a cool, dry and ventilated place to prevent physical deterioration. It should be stored separately from incompatibable substances. The empty container may contain its residual steam and liquid, and there is a possibility of danger. When the product is heated and the temperature reaches above the flash point, it is easy to cause fire risk and can form an explosive air mixture. Dimethyl phthalate is thermally degraded to carbon monoxide and carbon dioxide. Acetone, dimethyl sulfoxide, ethanol (95%) and aqueous solution were stable within 24 hours under normal laboratory conditions.

Usage

Colorless transparent yellowish oily liquid, slightly aromatic, boiling point 283.7°C. Can be miscible with ethanol, ether and other general organic solvents, insoluble in water and petroleum ether. This product is a kind of plasticizer with strong dissolving power in many kinds of resin, and can be dissolved in many kinds of cellulose resin, rubber, vinyl resin, and has good film forming, adhesion and waterproof property. It is often used with diethyl phthalate in the production of cellulose acetate film, varnish, transparent paper and molding powder. A small amount is used in the production of nitrocellulose. It can also be used as a plasticizer for nitrile rubber. The product can also be used as mosquito repellent oil (crude oil), polyvinyl fluoride coating, methyl ethyl ketone peroxide and DDT solvent.


Product Specification


Please click Contact Us or Email directly to info@hiseachem.com to get the latest specification.


Our services

Quality Control

Qingdao Hisea Chem is a company that focus on delivery reliable and high-quality products. Our analytical laboratory equipped with advanced apparatus as well as a professional chemist team that ensure our product meet your criteria. After you confirmed your order, we make sure your goods will be delivered with the corresponding certificate of analysis (CoA). For more details of our product CoA, Check Products or talk to one of our sale representative.

Quotation & Payment

Qingdao Hisea Chem offer competitive price to our customer. We offer Free on Board (FOB), Cost, Insurance, and Freight (CIF) price to your designated port. Payment options is flexible with Hisea chem, our company have gained great confidence with difference banks all around the world. Email us if you have questions about our quotation and payment policy.

Shipment & After sale service

After over 20 years on global trade, Qingdao Hisea Chem has formed a mature international trade logistics chain. For most of our products, we offer “door to door service”, our professional team gives you this “one-stop” service to save your time and increase your purchase experience.



FAQ

Q: What's your advantage? Why choose you?


A: More than 10 years experienced of production chemical production. We have the most professional techniques and team. Great production capacity Sustainable Supply. According to customer requirements, we support the customized.


Q: What's the payment?

A: T/T would be better with quick transfer and few bank. LC could also be accept, but the proceure is complex and the fee is high. You can also use Western Union. For large quantity, sea shipping can be provided.


Q: Are you a factory or trading company?

A: We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and cooperate with us.


Q: How can i get some samples?

A: We are honored to offer you samples. New clients are expected to pay for the courier cost,the samples are free for you.


Q: When can i get the price?

A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price, Please tell us in your email so that we will regard your inquiry priority.


Q: Where is your factory located?

A: Our factory is located in Qingdao,China.


Q: What is your sample policy?

A: Some of our samples are available for free,while others are available at a cost.


About us

Hisea 1

Hisea 2



Hisea 3

Hisea 4

Previous: 
Next: 
Leave a Message
Free Consultation

0086-532-85708217

0086-532-85708218

Road No.1#, Port Chem Logistics Park, Qingdao, China
About us
Qingdao Hisea Chem Co., Ltd located in the east part of China, which is the largest salt farm in China, the potassium related chemicals production ranked fourth in the world. The main products of...

Quick links

Subscribe

 
Sign up for our newsletter to receive the latest news.
 
 
Copyright © 2021 Qingdao Hisea Chem Co., Ltd. Support By Leadong | Sitemap